Raised Panel Newel Post made of premium clear Cedar. Caps for the 8″ wide newel are available in Cedar or Polyurethane. Caps for the 12″ newel are available in Polyurethane only.
Actual Width: 8″ or 12″.
Specify length. We recommend ordering newels 4″ taller than your top rail height. For example, if you have a 36″ top rail height, you’ll want to order a 40″ newel. Square portions are 9″ tall on each end. Square portions are tall enough that rails can be connected without running into the raised panel portion in most situations.
Made with floating raised panels, which helps prevent cracking due to the material expanding/contracting with the weather. Raised panel is on all four sides for a great look from any angle. An ingenious design constructed in similar fashion as a cabinet door, but with beefy corners to make for a strong newel post. The Open Center Design allows for the use of our Newel Installation Kit, which eliminates the need for trim to cover up fasteners. Or, they can be used as a decorative “sleeve” over an existing post. They can also be used as a COLUMN PEDESTAL in this way (non load bearing).
PRIMING OPTION (recommended): Premium acrylic primer in flat white available as an option, which allows for immediate installation. Expect some blemishes in the primer from shipping. This is normal and will not affect the finished result when painted after installation.
SHIPPING COST is displayed in shopping cart. Enter Quantity and click “ADD TO CART”.
Proudly Made in the USA.
For ProsDownload Product Drawings:
- Wood Balustrades 3 part specs (.doc)
- Wood Balustrade Structural Testing (PDF)
- Raised Panel Newel Drawings PDF
- Wood Balustrade Install Instructions PDF
- Newel Installation Kit Drawing PDF